• free delivery*
  • Dutch / German Quality
  • out of hours fitting support
  • price match
01508 5583089am - 5pm Mon - Fri.
  Hardware Post Holder Screw Down

Post Holder Screw Down

Post Holder Screw Down
Screw down post holders

Delivery is FREE*

(36 Reviews)  

Cat No 7.71500
Delivery Time: 3 - 5 Working Days
European Number: 8715815001730
£14.86 Including VAT
and FREE Delivery*
RRP: £22.79, Save £7.93
Save 35%
Note: you must order at least 2 items

Galvanized post holder, suitable for use with pergolas, gazebos, fences and arches. This screws/bolts down on to any solid surface. There are Three Sizes Available to suit our products.

Suitable for use with Pergolas, Gazebos, Fences, and Arches.

The Pre-Drilled Holes in these are 8-10mm in diameter, we do sell coach bolts in the Hardware section that you may like to use when securing the posts of your structure to this holder. The fixings that you use though to attach the Holder to you base may need to be specialized screws/bolts that can also be purchased locally as required.


  • Galvanised Steel
  • Three Different Sizes
  • Priced Per Unit
  • No Screws/Bolt Included

Available Sizes:

  • 7.71500 7.1 x 7.1 x 13cm
  • 7.91500 9.1 x 9.1 x 15cm
  • 7.12150 12.1 x 12.1 x 15cm
Price is per piece
Approximate Delivery Time: 3 - 5 Working Days FREE Delivery*

Post Holder Screw Down
Screw down post holders
Average customer rating:
(36 Reviews)  

5 Most recent customer reviews (see all reviews):
May 22, 2017
Does exactly what it says on the tin. We had trouble tracking down suitable post holders that would fit the (superb) Tuin gazebo, but these are spot on. Screw down to a concrete base and slot them in. Bolt holes ready if you want to secure the post further.
Mr. Michael Malonewy
May 17, 2017
From ordering to receiving the items, first class. These where require for a Gazebo order from the same supplier, again great service and what a buy , the quility is fantastic, extremely happy and will be back for some other bits .
Paul Yorke
Apr 6, 2017
I bought this post holder the day after the Christoffer kit arrived as I could see no obvious way to secure the base of the corner post and I didn't want to be held up during assembly waiting for something to secure the post. Later I discovered that there is a post support/adjuster plate etc so this purchase was unnecessary. I explained in detail to your order handler what this purchase was for and we discussed the required size at some length. A better informed assistant could have advised me that the post holder wasn't necessary as the kit includes a fixing. Still, it is what it is. It's a beautiful post holder but completely inappropriate for the task and unnecessary anyway. If it didn't cost so much in postage I'd have returned it for a refund. This was the only small black cloud on an otherwise excellent purchasing experience as I am very pleased with the Christoffer summer house now it's finished.
Mr. John Dinsdale
Apr 2, 2017
Make sure you buy these to go with your car port as it is hard to find other post holders to match the pole sizes.
Feb 13, 2017
As others have said, a bit on the expensive side (especially if you've already spent quite a bit on a carport/gazebo). But do seem very well made and pretty heavy/sturdy. Unlike some I've seen that look like they have been just spot welded, these were welded all the way round and made them look much stronger to me. They have holes for fixing on both the outside and inside. I decided on using the inside holes (as I'd made the concrete they were screwing into a bit too narrow) - if you do and use 10mm bolts, you will need to open the holes a bit, because they are so close to the edge, that a socket wouldn't fit on the nuts! If you buy for use with one of the carports on here, you'll need to do a bit of packing, as the holders are about 6 or 7 mm wider than the posts.

Tuin Garden Products and Log Cabins