Pressure Treated Decking Kits - 400cm Width

Pressure Treated Garden Decking Kits in widths of 400cm and in depths spanning from 2.1m up to 6m in increments of 0.30m. All pre-calculated to give you the correct number of framing beams, decking boards and screws. Looking into having a decked area in your garden - But finding out what you need is becoming too complicated? Let us make things easier with our garden decking kits -

The decking boards are grooved and 28mm in thickness. Along with the option of 95mm and 145mm thick framing beams- Please click to read more below and find out which beam size is best for your project.

Please note: These kits will need to be cut to size during installation, see the detailed description for more information on what is included in our decking kits. This kit is only available for a 400cm width deck, if you require something wider please look into the rest of our Garden Decking Kits.

These boards are manufactured with a relief on one side- Perfect for the traditional garden decking look. The other side is smooth, this side can be used for a clean decking look, or to be used as a timber frame base for your Log Cabin. See the detailed images on this page to find some examples of these kits being used for both decking and as a timber frame base.

You can either choose to purchase just the physcial timber from us which is the default option, Thats both the 28mm grooved decking boards and either the 95mm or 145mm deck framing beams. in this case no hardward such as scrows or joist hangers will be supplied. Or you can select to also include these in your purchase with in the same "Options" section above where the sizes can be chosen.

Decking Boards:

• Decking board width of 145mm.
• 28mm Thick decking Boards
• North European Pine.
• Premium quality.
• Pressure treated in green to prevent rotting.
• Kiln dried - to reduce warping and splitting.
• Planed smooth on the other side.
• Relief cut on one side- Ideal for garden decking

Timber Base Frame:

• 44mm x 95mm
• 44mm x 145mm available
• North European Spruce.
• Pressure treated in green.
• Kiln Dried.
• Planed Smooth.

Base frame: Like the decking board the frame timber will need to be cut to size on installation. Centers of 450mm.

The kit as supplied is for placing on a flat level area, directly onto weed matting. If you're planning to raise your decking instead of having it on ground level, there are multiple ways to do this: either with the use of posts or using something like our plastic adjustable post holders.

If you are planning to create a raised deck using our plastic timber frame adjustable base pads- We'd recommend that you select the 95mm thick frame beams when ordering your kit, the 95mm beams would also be suitable if you are planning to install your decking on a hard flat surface- On a concrete base for example. If you are planning to use timber posts to raise your decking, or plan to install it directly on soft ground then the 145mm thick beam option will be best for your project.

Screws: We have selected two kinds of screws for these kits, however they are optional. The post screws have been chosen due to their large head- Known to be resistant to breakage. Our framing screws measure at 8mm x 100mm and require a Torx 40 drill bit, the drill bit is included when a box of screws are ordered. The framing screws also have a yellow zinc plated finish. The decking screws measure to 5mm x 50mm with a Torx head.

Available decking kits:

Please Note, Sometimes the framing beam sizes will vary depending on availability but you will always be supplied enough to complete the deck

Approximate Delivery Time: Out of Stock

Delivery time for this item is listed above. Please note our working days are Monday - Friday.

Deliveries are carried out by external carriers, delivery is free to Zone One.

Please see the map below to determine what zone you will need. Please email in for delivery charges to Zone Two and Three

For more details on delivery please see the following: TUIN DELIVERIES