Brammelo DIY Flat Roof Gazebo 750x355cm

The modern and sleek Brammelo DIY Flat Roof Gazebo which is supplied in a fixed size of 750x355cm, change the wall configeration to suit your own requirements, Glass and timber panels available

This Gazebo is a European sleek and modern take on the traditional type that we're all used to here in the UK,  Supplied with a single large sheet of EPDM rubber roofing you will be certain of the level of protection from the weather above.

Start by clicking on the Options tab above and choosing the configuration of walls that you like the most, nearly any format is possible. Once you have chosen your starting configuration you can work your way down the options and add on any extra walls if required. For a closer look at each starting config, please see the main product images above.

Configuration One	Configuration Two
Configuration Three	Configuration Four

If you're planning to make your own configuration of walls then please select the first configuration and add your own walls, either from our list of from your own materials to suit your own preference.

The final listing offers anchoring solutions for the posts of this gazebo, all 14 of them. You do not necessity have to anchor all 14 down but you will need to protect any that are not from twisting out at the bottom through lack of support.

Brammelo Modern Gazebo Features:

• Made From treated Larch
• Tuindeco uses PEFC Certified Timber
• Interchangeable Walls
• 14 Vertical Posts
• Fixing and instructions included
• DIY construction
• Glass Walls Feature 4mm safety glass

Gazebo Dimensions:

• Out Post Sizes: 7.5 x 3.53m
• Inner Post Sizes: 7.472 x 3.25m
• Overall Roof Sizes: 7.538 x 3.568m
• Walk through Height: 2.34m
• Total Height: 2.64m
• Post Dimensions: 14x14cm
• Ring beam Timbers: 6.5x16.0cm
• Roof Beams: 4.5x145cm

Extra Wall options:

• K021830 - Extra Solid Wall Panels 99 x 234cm
• K021832 - Extra Slatted Wall Panels 99 x 234cm

Other Optional Extras:

• Timber Treatment
• Post Anchors ( Pre-fab Adjustable Concrete footings )
• EPDM Drainage Outlet
• Extra EPDM Glue

While the larch timber delivered will all arrive pressure treated to help with longevity, To help ensure it retains its rich reddish colour we do advise to apply your own further treatment as well.

Assembly Help:

Its important to note from the start that this is a DIY kit, Cutting and drilling will be required for both the main strucutre and all wall panels. Instructions are supplied to assist with this but some experience with timber construction will be required. You will require some basic tools including but not limited to the following

• Cordless/Corded Drill
• An array of normal drill bits
• Hammer
• Tape measure
• Hand/Electric Saw
• Spirit level

Download the fitting instructions below in advance to understand the construction requirements better. Please understand this is a DIy kit, parts will arrive in oversized lengths ready for onsite cutting and assembly

Approximate Delivery Time: 8 - 10 weeks