Garden Verandas From Tuin

Recently a very nice couple in Lincolnshire ordered one of our Large Garden Aluminium Verandas, It was a magnificent 10 x 4m structure with a very appealing “classic” style gutter system! The installers were all very jealous by the time they left.

We are normally just employed to supply and deliver the kit ready for self-assembly following our step by step English instructions and videos, But in this instance our own fitting team were also hired to perform the installation on their behalf.

This presented us with a unique opportunity to give one of our young apprentices a chance to both view and help with one of these things going together, It also allowed us to hear a younger person’s point of view which helped us understand some of the key concerns that our potential customers may have before ordering

Let me address some of them below based on what young Lee felt.


These Garden Verandas are sold as DIY kits ready for self-assembly, We have set sizes available for a quick delivery as well as more bespoke options to provide something more custom to suit your needs.

When seeing something like this online there could be some concerns that stop you from going ahead .. You may worry about getting it wrong or ordering the wrong thing or perhaps the concern lies with the actual installation, You may not know anybody that could do it for you… all fair concerns.

Let’s talk about the first,

“What if i order the wrong thing”

With our garden verandas it really is pretty simple we promise and we try and show this on our webpages as best we can, all you need to think about really are the points of contact between the veranda and your wall and garden.

How will it fix to our Wall?

The kits comes with a wall plate which will fix on the outside of your wall, this plate will be as wide as the veranda in question.. So a 3m veranda will come with a 3m wall plate. The wall plate needs a reasonably straight and flat surface to fix too but it doesn’t have to be perfect as most houses are not.

Verandas wall plate up against a wall

The best way to test this will be to grab a length of wood thats pretty true and offer this up against the wall to see, If you notice some variations on the wall then they can normally be packed out with something

Some outside walls will have obstacles running down them like drainage pipes for guttering or for things abit more personal from the upstairs loo . Sometimes even wiring, Our kits do not have adapters to take them around things like this so you will need to think about re-routing the obstacles to allow a clean fit of the wall plate prior.

Veranda Check

Excuse my bad drawing, It shows the back of a house with a pipe that could obstruct a veranda from being fitted above the door line.

Lastly regarding the wall plate you may ask how high does it need to be fitted?

To answer this we need to think about another question first which is “How tall do you want the walk through height to be at the low side ( the front ) of my veranda as its all to do with the set pitch of 8 degrees

An 8 degree pitch will equate to a rise of around 14cm for every meter of projection which will help us in planning the wall plates position, So here’s how we do it.

Let’s say we want a walk through at the front of 2.1m which is the standard most will aim for.

An example sketch from the side of a veranda

The side view of a Veranda

So we have our starting height which is 2.1m to the underside of the gutter and we know we need to go up 14cm for every meter the veranda projects upwards following an 8 degree pitch/rise.

In our example so far we have opted for a 3m wide veranda, so lets assign it a depth of 4m which is a very popular option. All we need to do is times 14cm by four to figure out the wall plates location

14 x 4 = 56cm

We then take our walk through height at the front ( 2.1m ) and add the calculated increase ( 56cm ) which gives us 2.66m

From this we now know that the bottom of your wall plate needs to be set at a height of 2.66m, Of course this will vary depending on the ordering size but the calculation and method remains the same.

Working out the wall plate height

Working out the wall plate height

So what to take from all of this and how to be confident you’re ordering correctly.

  • The wall plate we supply will match the width of your veranda, Will it fit unobstructed by anything on my wall?
  • The height that the wall plate is set at will depend on your walk through height at the low side, It can be calculated based on a rise of 14cm for every meter of projection
  • If in doubt, Just contact us.. no problem.

Lets take a look at the front end

How will the posts work and what do they need to fix too?

The number of posts that come will depend on the width and depth of the veranda you select, This is all pre-calculated so the webpages will advise you. These posts support the front ( low ) side of your veranda and one of them will also incorporate the drainage pipe from the integral gutter.

Back to our 3m wide veranda example, This would come supplied with Two posts, one at each corner at the front and looks a little like this.

An example showing the frontage of a veranda

3m Garden Veranda Example. Note in this instance its the left hand post where water will be draining, you can choose differently on the day when installing.

We supply leaf catches with in the kit, This prevents all the gunk that may accumulate on the roof from entering the drainage pipe, instead it will stay with in the gutter so just like your house you may need to clear it out once in a blue moon.

So how do those legs fix to the ground you may ask. Well, we offer a few different options to suit your base and this is where you need to choose what’s best for you. the list of options and descriptions can all be found on the product pages but if you need more clarification then we are very happy to help over the phone or by email.

Veranda Foundations Options

Our Different Foundation Options for the Posts

That really is it for this concern ( What if i order the wrong thing ).. there isn’t a lot to it so we hope this has given you more confidence but as we say, If there are still doubts then just contact us as we are always here to help.

Perhaps you may also be worried about installation?

“My concern rests mostly on the installation”

Putting garden veranda together on the day may seem like a daunting task but in reality it may not be as bad as you first think, customers will buy from us all the time with the confidence to install it themselves so we hope you will to.

The instructions we supply are in English and show you what to do in a step by step manner. On top of that we also have a clear video and bags of online advice and support from our experienced team over the phone and by email.

We do of course offer installation services as well for those who are not so keen but our hope is with the clear cut information we supply you will feel confident enough to save yourself some labour charges and tackle this yourselves

Perhaps you know someone who is more on the handy side.. offer them beer or a nice glass of wine and they may be willing to help.. promise them a BBQ with no expenses spared.. make a day out of it

My point is that you don’t need to be a professional to install these things, they’re user friendly and we are always here to help if you get stuck.

What to take away?

  • Fitting isn’t as bad as you may think, we promise
  • We send Full English step by step instructions
  • We have a detailed video, available on the product pages prior to ordering
  • People like free booze, Use this to your advantage
  • We are here to help if you get stuck!

A very stunning veranda

We have many examples but this might be my favourite

We'd love your comments on this.....