Modular Larch Asymmetrical Apex Garden Building Components

All the larch range of Apex barns are made up of a basic structure and then various modules are added. All the modules for the larch apex barn are listed to enable you to price up your ideal building.

The Larch Asymmetrical Apex Barn garden building contains the following modules:

Basic Larch Open Barn

• Rear wall module
• Side/front wall modules
• Doors and Windows
• Extension module

Wall modules are available in either untreated or black timber as well as sizes L and XL.

With these modules used in different combinations many garden buildings can be produced including carports, gazebos, garden offices, accomodation, garages and much, much more limited by your design,

Several example buildings can be found in our product pages, these are only examples and 100's more can be created using the Larch Garden Building Modules.

The larch timber supplied is dried and planed smooth, it is pre cut and supplied with the appropriate plans. Some construction experience is required in building these amazing garden buildings.

Every Larch garden building starts with the basic stucture, also can be found as Asymmetrical Apex Building Type One:

• 42.7910 - This is the basic open barn style garden structure and measures 470cm wide x 310cm deep. This structure can then have various components added to it to create any size or style building you require. It is supplied without a roof covering but it can accept full roof tiles or of course our felt shingles or metal roof plates.
• 42.7915 This is the same basic garden structure but in a larger size. Measuring at 680cm wide x 450cm deep with 14.5cm square posts, additional modules for this package will be listed with XL.

You can now add to the Basic open barn structure with various compenents as follows:

• 42.7911 - Extension to the basic open barn structure in Larch. This will extend the width of the basic structure by 210cm. It's overall dimensions are: width 210cm x 310cm deep.
• 42.7916 - Extension to the XL basic open barn structure in Larch. This will extend the width of the basic structure by 312cm. It's overall dimensions are: width 312cm x 450cm deep.

Rear wall Modules:

• 42.7932 - Rear Wall cladding module using Larch weatherboarding (Module U) this measures 198cm wide x 152cm in height. In Untreated Timber.
• 42.7933 - Rear Wall cladding module using Larch weatherboarding (Module U) this measures 198cm wide x 152cm in height. In Black Coated Timber.
• 42.7949 - Rear wall framing set. You could make your own frame for this section, perhaps in softwood but if it is seen then perhaps larch is better. This is a framing set for each rear wall cladding module.

• 42.7936 - XL Rear Wall cladding module using Larch weatherboarding (Module W) this measures 298cm wide x 152cm in height. In Untreated Timber.
• 42.7937 - XL Rear Wall cladding module using Larch weatherboarding (Module U) this measures 298cm wide x 152cm in height. In Black Coated Timber.
• 42.7950 - XL Rear wall framing set. You could make your own frame for this section, perhaps in softwood but if it is seen then perhaps larch is better. This is a framing set for each rear wall cladding module.

Side Wall / Front Wall Modules:

• 42.7934 - Side/Front Wall cladding module using Larch weatherboarding (Module P) this measures 190cm wide x 230cm in height. In Untreated Timber.
• 42.7935 -Side/Front Wall cladding module using Larch weatherboarding (Module P) this measures 190cm wide x 230cm in height. In Black Coated Timber.
• 42.7949 - Side wall framing set in Larch. This is a framing set for each side wall cladding module. 198cm wide.

• 42.7940 - XL Side/Front Wall cladding module using Larch weatherboarding (Module S) this measures 298cm wide x 269cm in height. In Untreated Timber.
• 42.7941 - XL Side/Front Wall cladding module using Larch weatherboarding (Module S) this measures 298cm wide x 269cm in height. In Black Coated Timber.
• 42.7151 - XL Side wall framing set in Larch. This is a framing set for each side wall cladding module. 298cm wide.

Painting your Larch Cladding

We have a large and varied range of treatments for your Larch building if you decide you would like to keep the natural colour or indeed change it completely. You may also be interested in a quicker way. We can paint it for you! Specifically we can supply the cladding in a traditional charcoal / black colour. If you're interested in this please ask us for a price for each of the modules.

Doors and Windows for your Larch Barn.

One you have your larch barn installed with the various modules required you can then put in doors and windows as you would like to in any front or side position you desire.

We can either supply these for you from our ranges or you can source your own. To make it easy we provide an adaptor kit to help you to fit the doors and windows:

• 42.7953 Adjustment frame kit for a single door or single window, it consists of 2 pieces of 1.6 x 14.5 x 400cm and 2 pieces of 40 x 60 x 400cm
• 42.7954 Adjustment frame kit for a double door or double window, it consists of 4 pieces of 1.6 x 14.5 x 300cm and 3 pieces of 40 x 60 x 300cm