• free delivery*
  • Dutch / German Quality
  • out of hours fitting support
  • price match
01508 5583089am - 5pm Mon - Fri.
  Metal Sheds Metal Shed 3 - 2.47 x 1.94m

Metal Shed 3 - 2.47 x 1.94m

Metal Shed 3 - 2.47 x 1.94m
Apex metal shed three Metal shed three plan view Extra folds in the metal to increase strength Metal shed colour example Ventilation points in a metal shed are very important Inside one of our metal sheds with extensive framing Metal shed door threshold Metal shed framing Galvanised metal shed foundations Stainless steel fittings for the metal sheds Tuin metal shed

Delivery is FREE*
(4 Reviews)  

Cat No 29.1103
Delivery Time: 7 - 10 Working Days
European Number: 8715815404012
Dimensions 2.47 x 1.94m
Overall roof dimensions 2570mm x 2050mm
Door Height 1730mm
Foundation Foundation included
Ridge Height 2120mm
Fixings Stainless Steel
Guarantee 10 Year Warranty
Frame thickness 0.6mm
Metal Cladding Thickness 0.30mm
Wind Loading 25 m/s or 90 km/hr
Roof loading 90 kg/m.sq
£396.38 Including VAT
and FREE Delivery*

Apex Metal Shed Three measuring 2.47 x 1.94  Made from hot dipped galvanised steel with a four coat protection. Foundation frame is Included and not an extra.

The ridge height of this apex metal shed is 2120mm. Dutch metal sheds are a little different to other standards. A little extra is added such as thicker metal, more folds to increase the strength, a stunning colour combination and stainless steel fittings throughout.


  • Width: 2475mm
  • Depth: 1940mm
  • Ridge Height: 2120mm
  • Door Height: 1730mm

General Metal Shed Three Standard Featuress:

  • Hot dipped galvanised steel.
  • Galvanised steel foundation.
  • Maintenance Free
  • Four Layer Paint protection.
  • Unique colour of dark and light grey  - RAL7004 (Signal Grey) and RAL7016 (Anthracite Grey)
  • Computor contolled manufacture ensuring the holes line up correctly.
  • Every panel is custom made specifically for Tuindeco with extra folds for strength and rigidity
  • Thicker steel - 0.30mm
  • 0.6mm galvanised steel framing.
  • 10cm higher door and structure compared to similar products.
  • Stainless steels screws and fasteners.
  • 10 Year Guarantee.
  • Full instructions.

Building specific features:

  • Sliding doors
  • Padlock compatible handles
  • Including Ventilation in apexes
  • Sloped door threshold for ease of access

Metal shed Three Strength features:

  • Tested to a wind load of 25m/s or 90 km/hr
  • Roof loading of 90kg/m.sq

This metal apex shed will serve you extremely well, it is very strong, fully tested and compliant to standards. It stands out a long way from any other metal shed on the market. 

Approximate Delivery Time: 7 - 10 Working Days FREE Delivery*

Average customer rating:
(4 Reviews)  

4 Most recent customer reviews (see all reviews):
Shaun Packham
Jul 14, 2017
A nightmare to put together - very fiddly, holes do not line up and very sharp edges but there's no way you can wear gloves. There is no floor supplied so a couple of sheets of decent ply will add £80 to the cost. What are called foundation bars are not a foundation and you will need a perfectly level concrete base to put the shed on. Do not attempt it on earth or sand.
Once put together, after much cursing by two skilled shed builders, the shed is solid and I guess good value. But I will not be recommending it and will refuse to put another one up if asked.
Tuin reply: Thank you for your review, all metal sheds can be a awkward to install. Please see this article we wrote regarding this so customer's are aware of any metal shed before purchase: https://www.tuin.co.uk/blog/metal-shed-advice-and-fitting/
Mr. Mark Polglase
Feb 10, 2017
Good value that is for sure as long as you have the time spare to build it. It took me about two full days as I built it on my own. There are lots of small fiddly screws and time spent ensuring that it was on level ground probably prevented this time going into the third day. That all said it is a good shed for the price.
Kevin cowling
Oct 16, 2016
Found the shed to be of good build quality,although some damage was caused by courier but Tuin said they would replace parts if needed,Ialso found one part midssing but did not effect the overall build so did not get Tuin to send me another,overall satisfied with the product.
Mr. Ian Edwards
Aug 27, 2015
Many promises are made by manufacturers and reading reviews by other buyers left me confused on which product and which company to use however, the deciding factor was not the time it took to erect (They all take about six hours) it was the price coupled with quality and it’s suitability. I chose Tuin 8 x 6 metal shed as this ticked all my required boxes. I placed an order on a Sunday expecting delivery between 7 to 10 working days later. It was delivered 4 days later. Due to inclement weather we could not begin assembly for two weeks. It took 6 ½ hrs to erect, chose not to use a power screw driver as these can overtighten screws and we did not require cloves. The plans we simple enough to follow and the finished shed looks good and is excellent. Tips: 1) Lay out all the parts ensuring nothing is missing before you start. (We had two items incorrectly supplied for the base) 2)double check the two white plastic door runners prior to assembly, these are not the best design, we added a glue to keep the two halves together and sprayed with WD40. Only 2 holes appeared out of line but that was probably due to our misalignment. I contacted Tuin on the out of hours contact number and replacement parts for the base were delivered 5 days later coming direct from Holland. Thanks Richard and Tuin, great product.


Tuin Garden Products and Log Cabins